Daily Maintenance of Twin Screw Extruder / Single Screw Extruder
1. No contaminant is allowed in the raw material. Hard stuff like metal and stone debris is prohibited from entering into the hopper and twin screw extruder;
2. When open the hopper cover or vacuum cover, please be very careful not to take foreign material into the extruder or standard single screw extruder ;
3. Spare sufficient time for warming up the machine and keep the temperature at present value for, normally, two hours;
4. The machine is allowed to get initiated only from low speed and the non-load running time is not allowed to be beyond three minutes.
2. When open the hopper cover or vacuum cover, please be very careful not to take foreign material into the extruder or standard single screw extruder ;
3. Spare sufficient time for warming up the machine and keep the temperature at present value for, normally, two hours;
4. The machine is allowed to get initiated only from low speed and the non-load running time is not allowed to be beyond three minutes.