Solutions for Twin Extruder Common Malfunctions

Unstable current of the mainframe

        Reasons:

(1)    Uneven feed.
(2)    There is a damage or bad lubricant effect in the axletree of the twin extruder’s main motor.
(3)    Failure in some parts of the heater and it does not work.
(4)    The trim plate of the screws is placed in a wrong place. Or interference from components because of the wrong phases.

        Solutions:

(1)Check the feeder and eliminate the faults.
(2)Check the main motor and change the axletrees of the twin extruder if necessary. 
(3)Check the heaters and replace the heaters of the twin extruder if necessary.
(4)Check the trim plates and pull the screws to ensure that there is no interference from components.